ar0510l7800vb

Remove/install chain tensioner

Type ar · emne 05.10 · version 0100 · 2003-03-13

Gælder for: ENGINE 166.961 /991 in MODEL 414.700

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 05 Motorstyring › 05.10 Forkædedrev, tandremstræk — Serie 166 (modeller 961, 991) · Serie 414 (modeller 700)

EinPAS 15 Motor › 15.17 Motorstyring › 15.17.34 Kædetræk/tandrem/tandhjulsdrev — Serie 166 (modeller 961, 991) · Serie 414 (modeller 700)

AR05.10-L-7800VB

Remove/install chain tensioner

1.8.01

ENGINE 166.961 /991 in MODEL 414.700

Remove/install chain tensioner

P05.10-0288-05

1 Screw

2 Chain tensioner

3 Gasket

Remove/install

1

Take off coolant expansion reservoir and place to the side with coolant lines connected

2

Unscrew bolts (1) and take off chain tensioner (2) together with gasket (3) at cylinder head

Chain tensioner (2) is spring-tensioned.

Pay attention to oil drillings (arrows)

Installation: Replace gasket (3). Pay attention to installation position (hole is off-centered).

*BA05.10-P-1001-01D

3

Install in the reverse order

Timing chain drive

Number

Designation

Engine 166.991/ 961

BA05.10-P-1001-01D

Bolt of chain tensioner to cylinder head

Nm

8