ar0510d8484c

Removing and installing slide rail in timing case cover

Type ar · emne 05.10 · version 0101 · 2000-02-15

Gælder for: ENGINE 111.979 in MODEL 901.0, 902.0, 903.0, 904.0 ENGINE 111.984 in MODEL 901.6, 902.6, 903.6, 904.6

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 05 Motorstyring › 05.10 Forkædedrev, tandremstræk — Serie 901 (modeller 0**, 6**) · Serie 902 (modeller 0**, 6**) · Serie 903 (modeller 0**, 6**) · Serie 904 (modeller 0**, 6**)

EinPAS 15 Motor › 15.17 Motorstyring › 15.17.34 Kædetræk/tandrem/tandhjulsdrev — Serie 901 (modeller 0**, 6**) · Serie 902 (modeller 0**, 6**) · Serie 903 (modeller 0**, 6**) · Serie 904 (modeller 0**, 6**)

Gælder også for motorer/gearkasser: 111 979, 111 984

AR05.10-D-8484C

Removing and installing slide rail in timing case cover

14.2.96

ENGINE 111.979 in MODEL 901.0, 902.0, 903.0, 904.0

ENGINE 111.984 in MODEL 901.6, 902.6, 903.6, 904.6

Removing and installing slide rail in timing case cover

D05.10-1003-06

1 Timing case cover

2 Slide rail

3 Bearing pin

Removing, installing

1

Remove timing case cover (1)

Do not damage oil pan gasket, take off timing case cover (1) carefully, replace oil pan gasket if necessary:

AR01.40-D-8000C

Remove oil pan.

AR01.45-D-7500C

2

Pull tensioning rail (2) off bearing pin (3)

The plastic guide of the tensioning rail (2) is clipped in place and can be replaced separately.

Running diagram of timing chain.

AR05.10-D-8127-01C

3

Install in the reverse order

The chain tensioner must be disassembled before being installed, moved into its basic position and then installed.

Henviste dokumenter