ar0510d7800c

Removing, installing chain tensioner

Type ar · emne 05.10 · version 0102 · 2000-02-15

Gælder for: ENGINE 111.979 in MODEL 901.0, 902.0, 903.0, 904.0 ENGINE 111.984 in MODEL 901.6, 902.6, 903.6, 904.6

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 05 Motorstyring › 05.10 Forkædedrev, tandremstræk — Serie 901 (modeller 0**, 6**) · Serie 902 (modeller 0**, 6**) · Serie 903 (modeller 0**, 6**) · Serie 904 (modeller 0**, 6**)

EinPAS 15 Motor › 15.17 Motorstyring › 15.17.34 Kædetræk/tandrem/tandhjulsdrev — Serie 901 (modeller 0**, 6**) · Serie 902 (modeller 0**, 6**) · Serie 903 (modeller 0**, 6**) · Serie 904 (modeller 0**, 6**)

Gælder også for motorer/gearkasser: 111 979, 111 984

AR05.10-D-7800C

Removing, installing chain tensioner

14.2.96

ENGINE 111.979 in MODEL 901.0, 902.0, 903.0, 904.0

ENGINE 111.984 in MODEL 901.6, 902.6, 903.6, 904.6

Removing, installing chain tensioner

D05.10-1000-06

1 Seal

2 Chain tensioner housing

3 Thrust pin

4 Compression spring

5 Filler pin

6 Seal

7 End piece

8 Chain tensioner

Removing, installing

1

Cover over alternator

2

Unscrew end piece (7), take off seal (6) and take out compression spring (4) together with filler pin (5)


Installation: Replace seal (6).

*BA05.10-N-1001-01A

3

Unbolt chain tensioner housing (2)


Installation: Replace seal (1).

*BA05.10-N-1002-01A

4

Install in the reverse order

If the chain tensioner (8) has been removed complete or parts of the chain drive replaced (timing chain, chain sprockets, tensioning rail, etc.), it must be disassembled before being installed, moved into the basic position and then installed:

Disassembling, assembling chain tensioner.

AR05.10-D-7800-02C

*BA05.10-N-1001-01A

*BA05.10-N-1002-01A

Timing chain drive

Number

Designation

Engine 111.979/
984

BA05.10-N-1001-01A

End piece in chain tensioner housing

Nm

40

BA05.10-N-1002-01A

Chain tensioner housing in timing case cover

Nm

80

Henviste dokumenter