Remove/install roller tappets

Type ar · emne 05.00 · version 0101 · 2003-09-04

Gælder for: ENGINE 541.9 in MODEL 950, 952, 953, 954 ENGINE 542.9 in MODEL 950, 952, 954

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 05 Motorstyring › 05.00 Generelt — Serie 950 · Serie 952 · Serie 953 · Serie 954

EinPAS 15 Motor › 15.17 Motorstyring › 15.17.30 ventildrev — Serie 950 · Serie 952 · Serie 953 · Serie 954

Gælder også for motorer/gearkasser: 541 9**, 542 9**

AR05.00-W-2311A

Remove/install roller tappets

20.11.00

ENGINE 541.9 in MODEL 950, 952, 953, 954

ENGINE 542.9 in MODEL 950, 952, 954

W05.20-0011-01

1 Roller tappet

5  Clamp fixture

 	Remove/Install
1	Remove cylinder head		AR01.30-W-5800B
2	Pull roller tappets (1) out of the crankcase	 Mark roller tappet relative to crankcase.  Installation: Slide in roller tappets with clamping bracket, while doing so observe the groove in the crankcase.
			*541589006300
3	Inspect roller tappets (1) for damage and wear	If damage or wear present:
		replace roller tappet.
4	Install in the reverse order

Clamp fixture

541 589 00 63 00