Remove, install hydraulic valve clearance compensating elements

AR05.00-P-2011QK

28.8.07

ENGINE 271.940 in MODEL 203.042 /242 /742, 209.342 /442

ENGINE 271.941 in MODEL 211.042 /242

ENGINE 271.946 in MODEL 203.046 /246 /746

ENGINE 271.948 in MODEL 203.040 /240 /740

ENGINE 271.921 in MODEL 203.730

ENGINE 271.955 in MODEL 209.341 /441

ENGINE 271.956 in MODEL 211.041 /241

ENGINE 271.942 in MODEL 203.043 /243 /743

ENGINE 271.957 in MODEL 203.741

P05.00-2038-11

Shown on engine 271.940

1 Compensating element

2 Clamp

3 Roller drag lever

 	Remove/install
1	Open engine hood	Model 203	AR88.40-P-1000P
		Model 209	AR88.40-P-1000Q
		Model 211	AR88.40-P-1000T
2	Remove cylinder head cover	Model 203, 209	AR01.20-P-5014QK
		Model 211	AR01.20-P-5014TK
3	Inspect basic position of camshaft	 Mark the position of the camshaft sprockets to the timing chain.	AR05.20-P-6010QK
4	Remove front cover at cylinder head		AR01.30-P-5700QK
5	Remove camshaft housing		AR05.20-P-6995QK
6	Remove camshafts		AR05.20-P-6992QK
7	Remove roller drag lever (3)
8	Slacken compensating element (1) from roller drag lever (3)	 Pry off clamp (2) by hand.
	Checking
9	Push compensation element (1) down by hand.	 Do not use a steel tool as the surface may be damaged. Apply pressure to compensation element (1) with normal hand force. If pressure is too strong, the compensation element (1) will appear to drop, but in reality the valve opens.
		 If several compensating elements (1) drop, check the hydraulic oil supply of the cylinder head.
10	Install in the reverse order