ar0500g5541nb

Disassemble, assemble rocker arm unit

Type ar · emne 05.00 · version 0101 · 2018-10-26

Gælder for: Engine 470.9, 471.9 in model 800.110/112 Inlet

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 05 Motorstyring › 05.00 Generelt — Serie 470 (modeller 9**) · Serie 471 (modeller 9**) · Serie 800 (modeller 110, 112)

EinPAS 15 Motor › 15.17 Motorstyring › 15.17.30 ventildrev — Serie 470 (modeller 9**) · Serie 471 (modeller 9**) · Serie 800 (modeller 110, 112)

AR05.00-G-5541NB

Disassemble, assemble rocker arm unit

01.10.2018

Engine

470.9, 471.9 in model 800.110/112

Inlet

Disassemble, assemble rocker arm unit

W05.00-1049-08

1

Intake rocker arm

4

Spacer sleeve (small)

C

Oil hole

2

Rocker arm spindle

A

Marking "TOP, FRONT"

3

Spacer sleeve (wide)

B

Marking "TOP, REAR"

Caution

Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil

Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.

AS18.00-Z-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-N-5000-01H

Disassemble

1

Remove intake rocker arm assembly.

AR05.00-G-5521NB

2

Mark installation position of the intake rocker arms (1) and spacer sleeves (3, 4).

3

Remove intake rocker arms (1) and spacer sleeves (3, 4) from the rocker arm spindle (2).

Check

4

Check intake rocker arms (1), spacer sleeves (3, 4), and rocker arm spindle (2) for wear and damage.

If wear or damage can be detected,

Replace affected parts.

Assemble

5

Clean oil holes (C) of the rocker arm spindle (2) with compressed air.

6

Wet bearing points and rocker arm spindle (2) with engine oil.

7

Attach intake rocker arms (1) and spacer sleeves (3, 4) to the rocker arm spindle (2).

Observe the attached markings and installation position of the intake rocker arm (1) and the spacer sleeves (3, 4).
Note marking "TOP, FRONT" (A) and marking "TOP, REAR" (B) on rocker arm spindle (2).

8

Install intake rocker arm assembly.

AR05.00-G-5521NB

Henviste dokumenter