Remove/install retaining lock for crankshaft/ring gear

Type ar · emne 03.30 · version 0101 · 2013-10-28

Gælder for: ENGINE 651 in MODEL 636 with TRANSMISSION 711.6 ENGINE 651 in MODEL 639 with TRANSMISSION 711.6, 722.6

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 03 Drivværk › 03.30 Svinghjul, medbringerskive, torsionsdæmper, startertandkrans — Serie 636 · Serie 639 · Serie 651

EinPAS 15 Motor › 15.15 forbrændingsmotor komplet/motorblok/krumtapdrev › 15.15.41 Krumtapaksel/svinghjul/medbringerskive — Serie 636 · Serie 639 · Serie 651

Gælder også for motorer/gearkasser: 711 6**, 722 6**

AR03.30-S-5000SJ

Remove/install retaining lock for crankshaft/ring gear

09.10.2013

ENGINE	651 in MODEL 636 with TRANSMISSION 711.6
ENGINE	651 in MODEL 639 with TRANSMISSION 711.6, 722.6

Remove/install retaining lock for crankshaft/ring gear

1	Retaining lock

S03.30-4509-11

	Remove
1	Remove starter from engine and place to one side		AR15.30-S-7100SJ
		 Do not remove electrical lines.
	Install
2	Insert retaining lock (1) into starter opening	 Turn engine if necessary at crankshaft for better engagement.
		 Counterholder	*651589004000
		 Retaining lock	*651589024000
	Remove
3	Remove retaining lock (1)	 Retaining lock	*651589024000
	Install
4	Install starter		AR15.30-S-7100SJ

651 589 00 40 00

Counterholder

651 589 02 40 00

Retaining lock

Henviste dokumenter

ar1530s7100sj