ar0330p5000pi

Remove/install retaining lock for crankshaft/ring gear

Type ar · emne 03.30 · version 0101 · 2005-04-07

Gælder for: ENGINE 642 in MODEL 203, 209

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 03 Drivværk › 03.30 Svinghjul, medbringerskive, torsionsdæmper, startertandkrans — Serie 203 · Serie 209

EinPAS 15 Motor › 15.15 forbrændingsmotor komplet/motorblok/krumtapdrev › 15.15.41 Krumtapaksel/svinghjul/medbringerskive — Serie 203 · Serie 209

Gælder også for motorer/gearkasser: 642 ***

AR03.30-P-5000PI

Remove/install retaining lock for crankshaft/ring gear

25.8.04

ENGINE 642 in MODEL 203, 209

Remove/install retaining lock for crankshaft/ring gear

P03.30-2100-06

1 Cover

2 Retaining lock

Remove/Install

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between the columns of the lifting platform and position the four support plates below the hoist support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

1

Remove bottom part of noise encapsulation

Only rear part.

AR94.30-P-5300P

2

Remove cover (1)

3

Insert the retaining lock (2) in the starter opening

Allow retaining lock to engage into the ring gear; crank the engine at the crankshaft in direction of engine rotation if required.

Retaining lock

*112589034000

4

Install in the reverse order

Remove/install retaining lock for crankshaft/ring gear

Retaining lock

112 589 03 40 00

Henviste dokumenter