Remove/install retaining lock for crankshaft/ring gear · ar0330p5000hb · Mercedes-Benz WIS

AR03.30-P-5000HB

Remove/install retaining lock for crankshaft/ring gear

12.12.08

ENGINE 611.960 in MODEL 202.133 /134 /193 /194

ENGINE 611.961 in MODEL 210.006 /007 /206 /606

ENGINE 612.961 in MODEL 210.016 /216 /616

ENGINE 612.963 in MODEL 163.113

ENGINE 612.965 in MODEL 463.322 /323

ENGINE 613.961 in MODEL 210.026 /226

ENGINE 613.960 in MODEL 220.026

ENGINE 612.966 in MODEL 461.302 /331 /332 /342 /345

P03.30-0224-06

Shown: Assembly of the retaining lock on the oil pan

1 Oil pan bolts M685

2 Cap

3 Retaining lock

4 Bolts M690

P03.30-2105-05

Shown: Assembly of the retaining lock on the starter opening

5 Retaining lock

Fig. item etc.	Work instructions
	Remove/install bottom parts of soundproofing	Model 163
		Model 202	AR94.30-P-5300A
		Model 210	AR94.30-P-5300AB
		Model 220
	Remove/install underride guard	Model 461, 463
3	Retaining lock	 Allow retaining lock (3) to engage in the ring gear for a removed cap (2); turn the engine at the crankshaft.
		 Attach retaining lock (3) to the oil pan while observing the observe tightening torque.
		 Use bolts M690 (4) instead of the bolts for the oil pan M6 85 (1), otherwise the thread in the rear end cover will be damaged
			*BA01.45-P-1001-01A
			*601589024000
5	Retaining lock	 Install retaining lock (5) in the starter opening for a removed starter and allow to engage in the ring gear. Crank engine at crankshaft, if necessary.
			*602589004000

 Oil pan

Number	Designation			Engine 611.960/ 961/962	Engine 612.961/962/ 963/965/966, 613.961	Engine 613.960


BA01.45-P-1001-01A	Bolt, oil pan to cylinder crankcase	M6	Nm	9	9	9
		M8	Nm	20	20	20
		M10	Nm	-	-	-

601 589 02 40 00

602 589 00 40 00

Retaining lock