Remove/install retaining lock for crankshaft/ring gear

AR03.30-P-5000CWX

Remove/install retaining lock for crankshaft/ring gear

22.2.11

 

Installing, removing

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

 Danger!

Risk of injury to skin and eyes caused by handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

1

Remove starter

Engine 272

AR15.30-P-7100CV

Engine 276

AR15.30-P-7100FH



Checking

2

Check splines of ring gear for drive plate

 Check splines for wear and damage by rotating engine at the center bolt for crankshaft in its direction of rotation. Replace clutch plate if necessary:



Engine 272

AR03.30-P-8001CV

Engine 276

AR03.30-P-8001FH



*001589650900

 Danger!

Risk of injury caused by moving parts that can pinch, crush or, in extreme cases, even sever extremities

No parts of the body or limbs should be within the operating range of the mechanism when moving components.

AS00.00-Z-0009-01A

3

Insert retaining lock (01) into access opening

 If required, rotate engine further at center bolt for crankshaft in engine's direction of rotation until the retaining lock (01) snaps into place.



*112589034000

4

Remove in the reverse order