ar0330p5000co

Remove/install retaining lock for crankshaft/ring gear

Type ar · emne 03.30 · version 0101 · 2008-08-18

Gælder for: ENGINES 642 in MODEL 204

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 03 Drivværk › 03.30 Svinghjul, medbringerskive, torsionsdæmper, startertandkrans — Serie 204

EinPAS 15 Motor › 15.15 forbrændingsmotor komplet/motorblok/krumtapdrev › 15.15.41 Krumtapaksel/svinghjul/medbringerskive — Serie 204

Gælder også for motorer/gearkasser: 642 ***

AR03.30-P-5000CO

Remove/install retaining lock for crankshaft/ring gear

14.8.08

ENGINES 642 in MODEL 204

Remove/install retaining lock for crankshaft/ring gear

P03.30-2100-06

1 Cover

2 Retaining lock

Remove/install

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

1

Remove bottom part of noise encapsulation

Only rear part.

2.1

Remove starter

Vehicles with 4MATIC

AR15.30-P-7100CWX

2.2

Unscrew nut for cover (1)

Vehicles without 4MATIC

*BA15.30-P-1003-01N

3

Take off cover (1)

Vehicles without 4MATIC

4

Insert retaining lock (2) in starter opening

Allow retaining lock to engage into the ring gear; crank engine at crankshaft in direction of engine rotation if required.

*112589034000

5

Install in the reverse order

Starter

Number

Designation

Engine
642

BA15.30-P-1003-01N

Bolt, starter to
cylinder crankcase

Nm

40

Remove/install retaining lock for crankshaft/ring gear

Retaining lock

112 589 03 40 00

Henviste dokumenter