ar0330g840102ba
Install guide bearing in flywheel
Type ar · emne 03.30 · version 0100 · 2011-04-19
Gælder for: ENGINE 900.91 /92, 902.92, 904.92 /95, 906.935 /95, 924.91 /92 Führungslager ohne Sicherungsring'
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 1 Motor › 03 Drivværk › 03.30 Svinghjul, medbringerskive, torsionsdæmper, startertandkrans — Serie 900 (modeller 91*, 92*) · Serie 902 (modeller 92*) · Serie 904 (modeller 92*, 95*) · Serie 906 (modeller 935, 95*)
EinPAS 15 Motor › 15.15 forbrændingsmotor komplet/motorblok/krumtapdrev › 15.15.41 Krumtapaksel/svinghjul/medbringerskive — Serie 900 (modeller 91*, 92*) · Serie 902 (modeller 92*) · Serie 904 (modeller 92*, 95*) · Serie 906 (modeller 935, 95*)
Gælder også for motorer/gearkasser: 924 91*, 924 92*
AR03.30-G-8401-02BA
| Install guide bearing in flywheel
|
|
|
1 Push back sleeve (2) on punch (1)
2 Slightly grease O-ring on punch (1).
3 Push guide bearing (3) up to stop to punch (1).
The groove (arrow) should point away from the punch (1)
4 Position punch (1) flush with guide bearing (3) on flywheel (4) and drive guide bearing (3) into flywheel (4) to end stop.
The installation depth for the guide bearing (3) is determined by the spacer ring (5) installed.
5 Take off drift (1).
