ar0320w4841r

Remove/install drive gear for oil pump on crankshaft

Type ar · emne 03.20 · version 0100 · 2009-02-18

Gælder for: ENGINES 926.9 in MODEL 949

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 03 Drivværk › 03.20 Krumtapaksel — Serie 949

EinPAS 15 Motor › 15.15 forbrændingsmotor komplet/motorblok/krumtapdrev › 15.15.41 Krumtapaksel/svinghjul/medbringerskive — Serie 949

EinPAS 15 Motor › 15.20 Motorsmøresystem › 15.20.30 oliepumpe/drev/olieindsprøjtningsdyse/olieindsugningsrør — Serie 949

Gælder også for motorer/gearkasser: 926 9**

AR03.20-W-4841R

Remove/install drive gear for oil pump on crankshaft

28.1.09

ENGINES 926.9 in MODEL 949

Remove/install drive gear for oil pump on crankshaft

W03.20-1133-06

1 Drive gear

2 Crankshaft

Arrow: Hub

Removing

1

Remove the crankshaft (2)

AR03.20-W-4351R

Danger!

Risk of injury to skin and eyes caused by handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

2

Heat drive gear (1) with hot air gun and pull off of crankshaft (2) with puller

Install

Danger!

Risk of injury to skin and eyes caused by handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

3

Heat drive gear (1) to approx. 200 °C in heating oven

Danger!

Risk of injury to skin and eyes caused by handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

4

Knock drive gear (1) onto crankshaft (2) with punch

Observe installation position of hub (arrow) on drive gear (1).

*904589021500

5

Install crankshaft (2)

AR03.20-W-4351R

Remove/install drive gear for oil pump on crankshaft

Drift

904 589 02 15 00

Henviste dokumenter