ar0320w4841j

Remove/install drive gear for oil pump on crankshaft

Type ar · emne 03.20 · version 0103 · 2010-12-06

Gælder for: ENGINES 900.9 in MODELS 375.1, 970, 972, 975, 976 ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5 ENGINES 902.9 in MODEL 957 except CODE (MS8) Natural gas engine ENGINES 902.9 in MODELS 375.1, 970, 972, 974, 975, 976 ENGINES 924.9 in MODELS 958.0, 970, 972, 974, 975, 976 ENGINES 925.9 in MODELS 970, 972, 974 ENGINES 926.9 in MODEL 958.0 ENGINES 926.9 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 957, 958.2

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 03 Drivværk › 03.20 Krumtapaksel — Serie 375 (modeller 1**, 3**) · Serie 900 (modeller 9**) · Serie 902 (modeller 9**) · Serie 950 (modeller 5**, 6**) · Serie 952 (modeller 5**, 6**) · Serie 953 (modeller 6**) · Serie 954 (modeller 5**) · Serie 957 · Serie 958 (modeller 0**, 2**) · Serie 970 · Serie 972 · Serie 974 · Serie 975 · Serie 976

EinPAS 15 Motor › 15.15 forbrændingsmotor komplet/motorblok/krumtapdrev › 15.15.41 Krumtapaksel/svinghjul/medbringerskive — Serie 375 (modeller 1**, 3**) · Serie 900 (modeller 9**) · Serie 902 (modeller 9**) · Serie 950 (modeller 5**, 6**) · Serie 952 (modeller 5**, 6**) · Serie 953 (modeller 6**) · Serie 954 (modeller 5**) · Serie 957 · Serie 958 (modeller 0**, 2**) · Serie 970 · Serie 972 · Serie 974 · Serie 975 · Serie 976

EinPAS 15 Motor › 15.20 Motorsmøresystem › 15.20.30 oliepumpe/drev/olieindsprøjtningsdyse/olieindsugningsrør — Serie 375 (modeller 1**, 3**) · Serie 900 (modeller 9**) · Serie 902 (modeller 9**) · Serie 950 (modeller 5**, 6**) · Serie 952 (modeller 5**, 6**) · Serie 953 (modeller 6**) · Serie 954 (modeller 5**) · Serie 957 · Serie 958 (modeller 0**, 2**) · Serie 970 · Serie 972 · Serie 974 · Serie 975 · Serie 976

Gælder også for motorer/gearkasser: 924 9**, 925 9**, 926 9**

AR03.20-W-4841J

Remove/install drive gear for oil pump on crankshaft

23.11.10

ENGINES 900.9 in MODELS 375.1, 970, 972, 975, 976

ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5

ENGINES 902.9 in MODEL 957 except CODE (MS8) Natural gas engine

ENGINES 902.9 in MODELS 375.1, 970, 972, 974, 975, 976

ENGINES 924.9 in MODELS 958.0, 970, 972, 974, 975, 976

ENGINES 925.9 in MODELS 970, 972, 974

ENGINES 926.9 in MODEL 958.0

ENGINES 926.9 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 957, 958.2

Remove/install drive gear for oil pump on crankshaft

W03.20-1133-06

1 Drive gear

2 Crankshaft

Arrow Groove

Removing

1

Remove crankshaft (2)

AR03.20-W-4351J

Danger!

Risk of injury to skin and eyes caused by handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

2

Heat drive gear (1) with hot air gun and remove from the crankshaft (2)

Install

Danger!

Risk of injury to skin and eyes caused by handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

3

Heat drive gear (1) with hot air gun up to about 200°C and mount on the crankshaft (2)

Use temperature measuring device with a measuring range of -200°C to +1000°C.
Observe installation position of groove (arrow) on drive gear (1).

4

Install crankshaft (2)

AR03.20-W-4351J

Henviste dokumenter