Remove/install race on the crankshaft

AR03.20-W-2570C

Remove/install race on the crankshaft

23.9.10



Removing

1

Remove front radial shaft sealing ring (5).

AR03.20-W-3000D

2

Pull off race (1) with the puller (3) at the crankshaft flange

 Set both halves of the  puller (3) above the race (1) and tighten the bolts (arrows).

 Puller

*442589003300



Install

 Danger!

Risk of injury to skin and eyes caused by handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

3

Heat new race (1) and drift (4)

  Heat drift (4) to a temperature of a maximum of 60°C.

Heat race (1) to a temperature of a maximum of 150°C.

The race (1) must not have any temper color; replace race (1) if required.

 Drift

*447589011500

4

Insert race (1) in drift (4)

 The chamfered edge of the race (1) must point to  drift (4).

5

Mount race (1) on crankshaft flange

 The race (1) must be mounted flush with the  drift (4) to front edge of crankshaft flange. Allow race (1) to cool off.

6

Install a new front radial shaft sealing ring (5).

AR03.20-W-3000D