Insertion tool
651 589 01 61 00
D03.20-1146-11
1 Push crankshaft radial sealing ring (1) in direction of arrow (A) onto the guide piece (2) of the insertion tool.
Sealing lip (3) on the crankshaft radial sealing ring (1) must point in the direction of arrow (A) over the whole circumference of the guide piece (2). Place crankshaft radial sealing ring (1) again if this is not the case.
D03.20-1147-11
2 Place guide piece (2) on crankshaft and attach using the two mounting bolts (4).
3 Push crankshaft radial sealing ring (1) onto the guide piece (2) up to the mounting hole on timing case cover (7).
The crankshaft radial sealing ring (1) must lie flush on the timing case cover (7).
D03.20-1148-11
4 Place thrust piece (5) on the guide piece and screw on nut (6).
Align bores (arrows) of the thrust piece (5) to the mounting bolts (4).
5 Screw on nut (6) until the thrust piece (5) touches the timing case cover (7).
When screwing on the thrust piece (5) ensure that the crankshaft radial sealing ring (1) is pressed in evenly in the mounting hole for the timing case cover (7).
6 Remove mounting bolts (4) alternately and remove insertion tool.