Modification notes
541 589 01 33 00
Pulling device
W01.40-0011-01
1 Screw stud bolts (1) into two opposite tapped holes of the cylinder head bolts.
W01.40-0010-01
2 Insert extractor (2) into the cylinder liner (3).
The guide collar of the extractor must be seated in the cylinder liner, do not distort extractor.
3 Fit countersupport (5) onto shaft and stud bolts (1) and tighten.
4 Pull out cylinder liner (3) by turning the nut (6).
5 Remove extractor.