Test and adjustment values for cylinder liner
Number | Designation | Engine 402.970 | Engine 441.980 | ||
BE01.40-N-1001-03F | Cylinder liner protrusion with pre-compressed cylinder liner | up to engine end no. 001 352 | mm | 0.03 to 0.07 | - |
- | mm | 0.05 to 0.09 | 0.03 to 0.09 | ||
BE01.40-N-1002-03F | Difference in cylinder liner projection | mm | 0.02 | 0.02 | |
BE01.40-N-1005-03F | Difference in thickness of collar of cylinder liner | mm | 0.02 | 0.02 | |
343 589 00 40 00
Dial indicator holder
Dial indicator
001 589 53 21 00
T01.40-0033-01
1 Determine mean dimension of collar of cylinder liner (1):
Measure liner collar 'A' at 4 points around circumference.
The maximum difference of the 4 measured points to each other must not be greater than the specification.
2 Calculate required liner seat depth 'C' in crankcase (2).
Example with 0.50 mm supporting ring:
Average dimension of liner collar 'A' 9.90 mm
+ Supporting ring (3) 0.50 mm
______________________________________________
= 10.40 mm
desired liner projection 'B' 0.09 mm
______________________________________________
= required depth of the liner seat 'C' 10.31 mm