ar0140b913301a
Inspect flatness of crankcase separating surface
Type ar · emne 01.40 · version 0102 · 2019-10-03
Gælder for: Engine 904, 906, 924, 926 in model 368, 382, 384, 634, 685.282/284/288/290, 979.2 Engine 904, 906, 924, 926 in model 693
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 1 Motor › 01 Motor komplet, motorudluftning, topstykke, motorblok › 01.40 Motorblok, takthusdæksel, endedæksel — Serie 368 · Serie 382 · Serie 384 · Serie 634 · Serie 685 (modeller 282, 284, 288, 290) · Serie 693 · Serie 904 · Serie 906 · Serie 979 (modeller 2**)
EinPAS 15 Motor › 15.15 forbrændingsmotor komplet/motorblok/krumtapdrev › 15.15.31 motorblok/olieudskiller/udluftning — Serie 368 · Serie 382 · Serie 384 · Serie 634 · Serie 685 (modeller 282, 284, 288, 290) · Serie 693 · Serie 904 · Serie 906 · Serie 979 (modeller 2**)
Gælder også for motorer/gearkasser: 924 ***, 926 ***
AR01.40-B-9133-01A
| Inspect flatness of crankcase separating surface
| Engine 904.9, 906.9, 924.9, 926.9
|
|
Engine
| 904, 906, 924, 926 in model 368, 382, 384, 634, 685.282/284/288/290, 979.2
|
Engine
| 904, 906, 924, 926 in model 693
|
Number
| Designation
|
|
| Engine 904.9, 906.9
| Engine 924.9, 926.9
|
BE01.40-B-1013-02C
| Maximum admissible deviation of the flatness at the engine block surface
| On the total length
| mm
| 0,030
| 0,030
|
|
|
| on a 150 mm length
| mm
| 0,015
| 0,015
|
1
| Check flatness of the upper side of the engine block (1) both lengthwise and crosswise with the precision ruler (2).
|
|
| Verify if there is a chink of light between the precision ruler (2) and the engine block (1).
|
2
| In case of deformation, check the maximum allowable deviation using a feeler gauge.
|
