ar0130d580011c

Removing, fitting on cylinder head at crankcase

Type ar · emne 01.30 · version 0100 · 1997-01-09

Gælder for: ENGINE 111.979 in MODEL 901, 902, 903, 904

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 01 Motor komplet, motorudluftning, topstykke, motorblok › 01.30 Topstykke — Serie 901 · Serie 902 · Serie 903 · Serie 904

EinPAS 15 Motor › 15.16 Topstykke › 15.16.31 Topstykke/toppakning — Serie 901 · Serie 902 · Serie 903 · Serie 904

Gælder også for motorer/gearkasser: 111 979

AR01.30-D-5800-11C

Removing, fitting on cylinder head at crankcase

Removing, fitting on cylinder head at crankcase

D01.30-1011-01

1 Take cylinder head (1) off crankcase.

Installing: Fit cylinder head (1) onto the crankcase so that the tensioning sleeves (2) are correctly located.

Removing, fitting on cylinder head at crankcase

D01.30-1012-01

2 Take off cylinder head gasket (3).

Installing: replace cylinder head gasket (3).

3 Inspect tensioning sleeves (2), replace if necessary.