ar0130d580004c
Removing slide rail bolts on cylinder head
Type ar · emne 01.30 · version 0101 · 2000-02-11
Gælder for: ENGINE 111.979 in MODEL 901.0, 902.0, 903.0, 904.0 ENGINE 111.984 in MODEL 901.6, 902.6, 903.6, 904.6
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 1 Motor › 01 Motor komplet, motorudluftning, topstykke, motorblok › 01.30 Topstykke — Serie 901 (modeller 0**, 6**) · Serie 902 (modeller 0**, 6**) · Serie 903 (modeller 0**, 6**) · Serie 904 (modeller 0**, 6**)
EinPAS 15 Motor › 15.17 Motorstyring › 15.17.34 Kædetræk/tandrem/tandhjulsdrev — Serie 901 (modeller 0**, 6**) · Serie 902 (modeller 0**, 6**) · Serie 903 (modeller 0**, 6**) · Serie 904 (modeller 0**, 6**)
Gælder også for motorer/gearkasser: 111 979, 111 984
AR01.30-D-5800-04C
| Removing slide rail bolts on cylinder head
|
|
|
1 Screw threaded pin at extractor (2) into the guide rail bolt (1) as far as the stop.
2 Screw in union piece at extractor (2) at cylinder head as far as the stop.
3 Use a suitable open-end wrench to screw in hexagon at the extractor (2) and in this way pull out the guide rail bolts (1).
