Remove/install cylinder head cover

Type ar · emne 01.20 · version 0101 · 2005-07-12

Gælder for: ENGINE 457.942 in MODEL 671.015 /020 /021 /030 /042 /332 /333

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 01 Motor komplet, motorudluftning, topstykke, motorblok › 01.20 Motorudluftning, ventildæksel — Serie 671 (modeller 015, 020, 021, 030, 042, 332, 333)

EinPAS 15 Motor › 15.16 Topstykke › 15.16.30 Ventildæksel — Serie 671 (modeller 015, 020, 021, 030, 042, 332, 333)

Gælder også for motorer/gearkasser: 457 942

AR01.20-T-5014AA

Remove/install cylinder head cover

22.5.01

ENGINE 457.942 in MODEL 671.015 /020 /021 /030 /042 /332 /333

T01.20-0002-11

1 Screw

2 Cylinder head cover

3 Gasket

 	Remove/install
1	Open left rear service flap
2	Unscrew screws (1)	 Light alloy cylinder head cover	*BA01.20-N-1001-01I
3	Take cylinder head cover (2) off cylinder head	 Installation: Clean sealing surfaces, install new gaskets (3).
4	Install in the reverse order

 Crankcase ventilation, cylinder head cover

Number	Designation		Engine 457.9


BA01.20-N-1001-01I	Bolt of light alloy cylinder head cover to cylinder head	Nm	25