D01.20-1049-09
Shown on model 906 with engine 642 |
1 | Filler neck | 5 | Support | 9 | Cylinder head cover | ||
2 | Screw/bolt | 6 | Ball head | 10 | Oil dipstick guide tube | ||
3 | Cover | 7 | Electrical wiring harness | ||||
4 | Soundproofing | 8 | Oil filler cap |
| Remove/install | ||
1 | Remove air intake hose downstream of air filter |
| |
Engine 642.896/898/992/993 in model 906 | |||
2 | Remove engine cover |
| |
Engine 642 in model 639 | |||
3 | Unclip electrical wiring harness (7) | Engine 642.896/898 in model 906 | |
Installation: Ensure that electrical wiring harness (7) is routed correctly. | |||
4 | Unclip oil dipstick guide tube (10) on bracket above | ||
5 | Remove screw/bolt (2) | ||
6 | Turn filler neck (1) anticlockwise and remove upwards | ||
7 | Unscrew oil filler cap (8) on filler neck (1) | ||
8 | Screw the oil filler cap (8) onto the cylinder head cover (9) | ||
9 | Unclip cover (3) above and remove upward | Installation: Position soundproofing (4) in cover (3) correctly. Engage mounting (5) of the cover (3) in ball heads (6). | |
10 | Install in the reverse order |