T13.00-0002-11
1 Detach control line (1) from cylinder head (2) of air compressor.
2 Detach hose (3) from intake muffler (4).
T07.15-0003-11
3 Remove electrical connector (5) from PLN control unit.
4 Further detach cable set (6) between engine and alternator II and along the engine.
Installation: Use new tie strap.
5 Detach fuel line (7) from PLN control unit.
6 Detach ground cable (8) from engine
T15.18-0004-11
7 Detach cable set (6) along the clutch housing and above the oil pan (9).
Installation: Use new tie strap.
8 Remove electrical lines at starter (10) and cable set along the engine to the generatorI (arrow).
9 Detach hose from oil filler neck of oil pan (9).
10 Reinstall in reverse order.