ar0110p2408mro

Remove/install rear engine cover

Type ar · emne 01.10 · version 0100 · 2020-08-27

Gælder for: Engine 264 in model 463

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 01 Motor komplet, motorudluftning, topstykke, motorblok › 01.10 Motor komplet — Serie 463

EinPAS 15 Motor › 15.15 forbrændingsmotor komplet/motorblok/krumtapdrev › 15.15.45 afdækning/beklædning — Serie 463

Gælder også for motorer/gearkasser: 264 ***

AR01.10-P-2408MRO

Remove/install rear engine cover

10.08.2020

Engine

264 in model 463

Remove/install rear engine cover

1

Elastomer bearing

2

Rear engine cover

3

Guide

P01.10-3463-06

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Switch off ignition and store transmitter key outside of transmitter range (min. 2 m).

2

Remove upper engine cover.

AP01.10-P-2405-01I

3

Release elastomer bearings (1) of the rear engine cover (2) from the ball heads.

Installation: Coat the elastomer bearings (1) with lubricant.

Lubricant, rubber assembly 1 l

*BR00.45-Z-1010-06A

4

Tilt rear engine cover (2) toward rear and remove from guide (3).

5

Guide rear engine cover (2) out of clip (4) and remove.

Installation: Ensure that rear engine cover (2) is seated correctly on guide (3).

Check

6

Check elastomer bearings (1) for damage and wear.

If damage is present:

replace affected elastomer bearing (1).

7

Install in the reverse order

Repair materials

Number

Designation

Order number

BR00.45-Z-1010-06A

Lubricant, rubber assembly 1 l

A 000 989 03 67

Henviste dokumenter