ar0110p2405m

Remove and install engine cover

Type ar · emne 01.10 · version 0100 · 2003-06-24

Gælder for: ENGINE 628.960 in MODEL 220.028 /128

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 01 Motor komplet, motorudluftning, topstykke, motorblok › 01.10 Motor komplet — Serie 220 (modeller 028, 128) · Serie 628 (modeller 960)

EinPAS 15 Motor › 15.15 forbrændingsmotor komplet/motorblok/krumtapdrev › 15.15.45 afdækning/beklædning — Serie 220 (modeller 028, 128) · Serie 628 (modeller 960)

AR01.10-P-2405M

Remove and install engine cover

2.4.03

ENGINE 628.960 in MODEL 220.028 /128

Remove and install engine cover

P01.10-2452-08

1 Air cleaner housing

2 Dipstick

3 Front engine trim panel

3a Bolt

3b Bolt

Remove/Install

1

Open engine hood and raise to vertical position

AR88.40-P-1000M

2

Remove air cleaner housing (1).

AR09.10-P-1050M

3

Pull oil dipstick (2) out of oil dipstick guide tube

4

Unscrew bolts (3a, 3b).

Bolt of front engine cover to charge air pipe

*BA01.10-P-1001-01A

Bolt of front engine cover to charge air intake pipe

*BA01.10-P-1002-01A

5

Remove front engine cover (3) toward top

In order to avoid scratches and damage, the front engine cover (3) must be put down onto a padded base.

6

Insert oil dipstick (2) into the oil dipstick guide tube.

In order to avoid parts and impurities penetrating the oil dipstick guide tube.

7

Install in the reverse order

Engine cover

Number

Designation

Engine 628.960/
961/963

BA01.10-P-1001-01A

Bolt of front engine cover to charge air pipe

NM

8

BA01.10-P-1002-01A

Bolt of front engine cover to charge air intake pipe

NM

8

Henviste dokumenter