454 589 00 62 00
Support fixture
Motor crossmember
454 589 00 61 00
Commercially available tools
P01.10-2523-06
Shown on engine 135.9
1 Mount support fixture (2) according to the respective engine (1).
2 Raise vehicle and position support fixture (2) with main lifter (3) under the engine (1).
The main lifters (3) from the companies Mazzola and AS Hydraulic can be used as desired.
3 Move out main lifter (3) by about 20 cm.
4 Lower vehicle until the support fixture (2) can be fastened to the attachment points (arrows) on the engine (1).
5 Fasten support fixture (2) to the attachment point (arrows) on the engine (1).
6 Move out main lifter (3) using the support fixture (2) and engine (1) until the engine bridge (4) is no longer under tension.
7 Remove engine bridge (4) on engine (1).
8 Lower main lifter (3) with engine (1).
9 Raise vehicle until the engine (1) cam be pushed out of the working area.
10 Install in reverse order.