Commercially available tools
Workshop equipment
WE58.40-Z-1022-11A | Engine supporting arm |
D22.10-0051-01
1 Unscrew top securing bolt at right and left engine mount.
Installation: Mount engine lightly onto the engine mounts, screw in the securing bolts and tighten by hand until they make contact. Then, lower the engine fully and tighten securing bolts fully.
L01.10-0001-11
2 Insert engine supporting arm (1) and attach as close as possible to the lifting eyes (2, 3) at the engine by means of chains and shackle.
Before raising engine, set center of gravity and tighten clamping bolt (arrow) fully.
3 Raise engine slightly with fork-lift truck.
D22.10-0052-01
4 Unscrew bolt at bottom at engine mount and remove right and left engine mounts complete.
Pay attention to installation position.
Inspect engine mounts for wear, replace if necessary.
5 Raise engine further and remove carefully.
Place down engine and transmission reliably after lifting out.