ar0110d240001c

Removing and installing engine with removal fixture

Type ar · emne 01.10 · version 0108 · 2006-07-25

Gælder for: ENGINE 111.979 in MODEL 901.0, 902.0, 903.0, 904.0 ENGINE 111.984 in MODEL 901.6, 902.6, 903.6, 904.6

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 01 Motor komplet, motorudluftning, topstykke, motorblok › 01.10 Motor komplet — Serie 901 (modeller 0**, 6**) · Serie 902 (modeller 0**, 6**) · Serie 903 (modeller 0**, 6**) · Serie 904 (modeller 0**, 6**)

EinPAS 15 Motor › 15.15 forbrændingsmotor komplet/motorblok/krumtapdrev › 15.15.15 forbrændingsmotor komplet — Serie 901 (modeller 0**, 6**) · Serie 902 (modeller 0**, 6**) · Serie 903 (modeller 0**, 6**) · Serie 904 (modeller 0**, 6**)

Gælder også for motorer/gearkasser: 111 979, 111 984

AR01.10-D-2400-01C

Removing and installing engine with removal fixture

Engine mounts, engine supports

Number

Designation

Engine 111.979

Engine 111.984

BA22.10-N-1002-01H

Engine support to front engine mount

Nm

83

83

Workshop equipment

WE58.40-Z-1020-11A

Removal fixture for engine

Removing and installing engine with removal fixture

D01.10-1001-01

1 Move in engine removal fixture, attach stop parts to engine and raise engine slightly.

Before raising engine, set center of gravity and tighten clamping bolt (arrow).

Removing and installing engine with removal fixture
Removing and installing engine with removal fixture

D22.10-1004-01

D22.10-1003-01

2 Slacken engine supports (1 and 5) at both engine mounts (4 and 8), raise engine further and pull out.

Installation: Place engine slightly onto the engine mounts (4 and 8), screw in the securing bolts (2 and 6) and tighten by hand until they make contact. Then, lower engine fully and tighten securing bolts (2 and 6) to the final torque.
Pay attention to tightening torque.