ar0110d240001b

Removing and installing engine with removal fixture

Type ar · emne 01.10 · version 0106 · 2006-07-25

Gælder for: ENGINE 602.984 in MODEL 667, 668, 670 ENGINE 602.985 in MODEL 668, 670

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 01 Motor komplet, motorudluftning, topstykke, motorblok › 01.10 Motor komplet — Serie 602 (modeller 984, 985) · Serie 667 · Serie 668 · Serie 670

EinPAS 15 Motor › 15.15 forbrændingsmotor komplet/motorblok/krumtapdrev › 15.15.15 forbrændingsmotor komplet — Serie 602 (modeller 984, 985) · Serie 667 · Serie 668 · Serie 670

AR01.10-D-2400-01B

Removing and installing engine with removal fixture

Engine 602.984 in model 667, 668, 670

Engine 602.985 in model 668, 670

Engine mounts, engine supports

Number

Designation

Engine 602.980

Engine 602.984/
985

BA22.10-N-1002-01A

Engine support to front engine mount

Nm

83

68

Workshop equipment

WE58.40-Z-1022-11A

Engine supporting arm

Removing and installing engine with removal fixture

D01.10-0066-01

1 Move in engine removal fixture and attach stop parts to the suspension points at the engine.

2 Raise engine slightly.

Before raising, set center of gravity (3 detents on transmission side) and tighten clamping bolt fully.

Removing and installing engine with removal fixture

D01.10-0014-01

3 Unbolt engine support at engine mount.

4 Raise engine further and remove.

Installation
Move engine down slightly onto the engine mounts. Screw in securing bolts and tighten by hand until they make contact. Then, lower engine fully and tighten securing bolts to the specified torque.