ar0100p241002v

Disconnect engine wiring harness

Type ar · emne 01.00 · version 0102 · 2009-04-30

Gælder for: ENGINE 271 in MODEL 171 Zum Ausbau der Zylinderkopfhaube

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 01 Motor komplet, motorudluftning, topstykke, motorblok › 01.00 Generelt — Serie 171

EinPAS 25 bilens ledningsnet/netværk/multifunktion › 25.25 Hovedledningssæt › 25.25.20 Motorledningssæt — Serie 171

Gælder også for motorer/gearkasser: 271 ***

AR01.00-P-2410-02V

Disconnect engine wiring harness

To remove the cylinder head cover

Cylinder head

Number

Designation

Engine
271

BA01.30-P-1001-01J

Bolt, ground line to front cover

M6

Nm

8

Disconnect engine wiring harness

P01.00-2413-09

1 Disconnect plug (1) from intake camshaft Hall sensor, left (B6/4).

2 Disconnect plug (2) from intake camshaft Hall sensor, right (B6/5).

3 Disconnect plug (3) from coolant temperature sensor (B11/4).

4 Disconnect plug (4) from air pump switchover valve (Y32).

5 Disconnect plug (5) from camshaft exhaust solenoid (Y49).

6 Disconnect ground line (6) from front cover.

7 Unplug connector (7) of the circuit 61 (D+) electrical connection from alternator (G2).

8 Unclip electrical line of the connector (7) from mounting clips and pull upwards.

9 Expose engine wiring harness and remove from cylinder head cover.

Installation: Check that engine wiring harness is correctly routed to the cylinder head cover (arrow).