P01.00-2345-09
1 Disconnect plug (1) from intake camshaft Hall sensor, left (B6/4).
2 Disconnect plug (2) from intake camshaft Hall sensor, right (B6/5).
3 Disconnect plug (3) from coolant temperature sensor (B11/4).
4 Disconnect plug (4) from air pump switchover valve (Y32).
5 Disconnect plug (5) from camshaft exhaust solenoid (Y49/3).
6 Detach ground line (6) from cylinder head.
7 Disconnect tml. 61 electrical connection plug (7) from alternator (G2).
Unclip electrical line from fixing clips and pull upwards.
P01.00-2542-06
8 Disconnect plug (8) from gas rail.
Only for bivalent natural gas drive, Code 924
9 Disconnect plug (9) of CNG control unit.
Only for bivalent natural gas drive, Code 924
10 Release the engine wiring harness and remove cylinder head cover.
Installation: Check that the engine wiring harness is correctly routed in the cylinder head cover (arrow).