ar0060p100501d

Raise/prop up vehicle with vehicle lift

Type ar · emne 00.60 · version 0100 · 2019-12-05

Gælder for: Model 463 as of model year 2019

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 0 Samlet › 00 Samlet køretøj › 00.60 Hævning, bugsering — Serie 463

EinPAS 45 Data/information › 45.10 hele bilen › 45.10.20 hele bilen — Serie 463

AR00.60-P-1005-01D

Raise/prop up vehicle with vehicle lift

Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Topical note

Information on influencing load ratios when removing major assemblies

AH00.60-P-0001-01A

000 588 00 80 00 Vehicle lift

WS00.00-P-0040B

Model

463

as of model year 2019

Raise/prop up vehicle with vehicle lift

463 589 02 31 00

Adapter

Raise/prop up vehicle with vehicle lift

P00.60-A008-09

1

Position adapters (1) on vehicle lift support points (B, C) on longitudinal members.

2

Turn supports (2) of vehicle lift support arms until the adapters (1) make contact with the vehicle lift support points (B, C).

3

Lift vehicle with lifting platform.

Then secure vehicle on vehicle lift.
Otherwise it can tilt from the vehicle lift.

Secure vehicle diagonally at front left vehicle lift support point (C) and at rear right vehicle lift support point (B).
Otherwise, the vehicle will not be correctly positioned on the vehicle lift.

Raise/prop up vehicle with vehicle lift

P00.60-2246-09

4

On front left vehicle lift support point (C), place tensioning strap (4.1) between the tie-down eye (5) and the vehicle lift swivel arm and tighten.

When lashing down, note adjacent component parts.
Otherwise, this will be pinched or damaged.

When lashing down, note any sharp-edged objects.
Otherwise, there will be damage to the tensioning strap (4.1).

5

On rear right vehicle lift support point (B), place tensioning strap (4.2) between the tie-down eye (6) and the vehicle lift swivel arm and tighten.

When lashing down, note adjacent component parts.
Otherwise, this will be pinched or damaged.

When lashing down, note any sharp-edged objects.
Otherwise, there will be damage to the tensioning strap (4.2).

Henviste dokumenter