000 589 13 99 00
Blade holder with clamping pliers
Wiring harness repair kit, basic
New passenger vehicle wiring harness repair kit
MPT blade
220 589 04 99 00
220 589 01 99 50
220 589 01 99 51
P54.18-2536-01
Unfasten secondary release on version with retaining cap (shown on Maxi Power Timer, Junior Power Timer coupling)
1 Using a suitable tool, pry up the lock tabs on the retaining cap (1).
2 Pull the retaining cap from the clutch housing (2).
P54.18-2537-06
Unpin female contacts from coupling
3 Insert blade holder with clamping pliers and MPT blade from front side though openings at contact cavity of coupling (1).
This step compresses the spring shackles (2) on the female contact.
4 A slight tug on the corresponding cable will remove the female contact (1) from the coupling.