ar0019p012006a
Remove contacts from Micro Timer 3 coupling
Type ar · emne 00.19 · version 0111 · 2018-05-30
Gælder for: Model all (4xWD, BUS, CAR, Heavy transporter, Light transporter, TRUCK, UNIMOG, smart)
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 0 Samlet › 00 Samlet køretøj › 00.19 El-system køretøj, alle forbindelser — Serie 900 (modeller 9**) · Serie 902 (modeller 9**) · Serie 904 (modeller 918, 919, 924, 925, 938, 943, 957) · Serie 906 (modeller 917, 918, 924, 953)
EinPAS 25 bilens ledningsnet/netværk/multifunktion › 25.25 Hovedledningssæt › 25.25.1 Grundinformation — Serie 900 (modeller 9**) · Serie 902 (modeller 9**) · Serie 904 (modeller 918, 919, 924, 925, 938, 943, 957) · Serie 906 (modeller 917, 918, 924, 953)
Gælder også for motorer/gearkasser: 139 ***, 254 ***, 256 ***, 272 ***, 276 ***, 282 ***, 457 9**, 541 9**, 542 9**, 608 ***, 700 4**, 700 420, 700 421, 700 422, 700 423, 715 3**, 715 5**, 722 6**, 722 9**, 724 ***, 724 0**, 724 033, 724 044, 724 045, 724 1**, 724 103, 724 114, 724 115, 724 120, 725 ***, 725 0**, 725 035, 725 037, 725 038, 725 085, 725 1**, 739 390, 739 391, 739 395, 739 396, 739 397, 739 398, 739 399, 740 698, 743 3**, 743 4**, 743 498, 746 971, 924 9**, 924 910, 925 9**, 926 9**
AR00.19-P-0120-06A
| Remove contacts from Micro Timer 3 coupling
|
|
|
Model
| all (4xWD, BUS, CAR, Heavy transporter, Light transporter, TRUCK, UNIMOG, smart)
|
New passenger car wiring harness repair kit
Blade holder with clamping pliers
Wiring harness repair kit, basic
The following tools are required for removal:
New passenger vehicle wiring harness repair kit
Wiring harness repair kit, basic
Blade holder with clamping pliers
MT 3 blade
Loosen secondary release
1
| Slide retaining slider with a suitable tool in direction of arrow out of end locked position.
|
|
| Different retaining sliders are installed.
|
Remove female contact (1) from connector
2
| Insert blade holder with collet and MT 3 blade from the front side through openings at contact cavity of coupling.
|
|
| Insert tool carefully.
Otherwise there might be damage to the bars between the contact cavity and the openings for the tool.
|
|
| This pushes together the springs at the female contact (1).
|
3
| A slight tug on the corresponding cable will remove the female contact (1) from the coupling.
|
