ap8330t8338bac

Clean air recirculation filter for passenger compartment ventilation

Type ap · emne 83.30 · version 0100 · 2005-07-12

Gælder for: MODEL NMB613.358 /388 with CODE (HKD) Konvekta ACX 640 air conditioning with roof heater MODEL NMB613.358 /388 with CODE (HKF) Webasto Top 2002 Aerosphere air conditioning with roof heater MODEL NMB613.455 with CODE (HKE) Konvekta ACX 642 air conditioning with roof heater MODEL NMB613.367 with CODE (HKG) Konvekta ACX 623 air conditioning with roof heater

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 83 Klimatisering › 83.30 Klimaanlæg — Serie 613 (modeller 358, 367, 388, 455)

EinPAS 39 Varmesystem/ventilation/køling › 39.15 Klimatisering › 39.15.32 hus/varmeveksler/fordamper/filter — Serie 613 (modeller 358, 367, 388, 455)

AP83.30-T-8338BAC

Clean air recirculation filter for passenger compartment ventilation

24.11.04

MODEL NMB613.358 /388 with CODE (HKD) Konvekta ACX 640 air conditioning with roof heater

MODEL NMB613.358 /388 with CODE (HKF) Webasto Top 2002 Aerosphere air conditioning with roof heater

MODEL NMB613.455 with CODE (HKE) Konvekta ACX 642 air conditioning with roof heater

MODEL NMB613.367 with CODE (HKG) Konvekta ACX 623 air conditioning with roof heater

Clean air recirculation filter for passenger compartment ventilation

T83.10-0012-11

Shown on model 613.358 with Konvekta ACX 640 air conditioning with roof heater code HKD

1 Recirculating air filter frame

2 Bolt

3 Flap

Clean air recirculation filter for passenger compartment ventilation

T83.10-0013-10

Shown on model 613.358 with Konvekta ACX 640 air conditioning with roof heater code HKD

4 Recirculated air filter

5 Retaining grid

Remove/install

Danger!

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.

Deburr repair panels.

AS00.00-Z-0017-01A

1

Cover passenger seats in working area

In order to prevent contamination.

2

Open flap (3).

3

Loosen screw (2)

4

Pull frame of air recirculation filter (1) downwards slightly and remove

5

Remove retaining grid (5)

6

Detach air recirculation filter (4) from air recirculation filter frame (1)

Wash out undamaged air recirculation filters (4) with water and clean with compressed air, replace if necessary.

7

Install in the reverse order

Henviste dokumenter