ap8310g8337e

Clean ventilation filter, inspect and replace if necessary

Type ap · emne 83.10 · version 0100 · 2007-11-15

Gælder for: MODEL 405.050 with BODY 979.820

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 83 Klimatisering › 83.10 Ventilationssystem — Serie 405 (modeller 050) · Serie 979 (modeller 820)

EinPAS 39 Varmesystem/ventilation/køling › 39.15 Klimatisering › 39.15.32 hus/varmeveksler/fordamper/filter — Serie 405 (modeller 050) · Serie 979 (modeller 820)

AP83.10-G-8337E

Clean ventilation filter, inspect and replace if necessary

13.11.07

MODEL 405.050 with BODY 979.820

Clean ventilation filter, inspect and replace if necessary

G83.10-3154-07

1 Heater housing

2 Cover

3 Release handle

4 Screw

5 Ventilation filter

Removing

1

Remove bolts (4)

2

Remove cover (2)

In doing, so lift the release handle (3) upwards.

3

Remove ventilation filter (5) from heater housing (1) (arrow)

Clean

4

Clean ventilation filter (5) using compressed air

In the event of strong soiling, the ventilation filter (5) is to be replaced.

Install

5

Install ventilation filter (5) into the heater housing (1)

The arrows on the ventilation filter (5) must face towards the passenger compartment.

6

Install cap (2)

Hook cover (2) upwards into heater housing (1) and then press at bottom onto the heater housing (1), until the release handle (3) is locked.

7

Screw in screws (4)