Model | 382.171/175/176/177/178/184/185/186/188/189 with engine 906.918/933/974/975/977/983/988/994/998, 926.910/926/933/942 |
with code M11 (Euro III) | |
Model | 382.171/176/177/178/185/188/189 with engine 926.996/999 |
with code MS5 (Euro V) | |
except code MH1 (DIESEL-GASEOUS FUEL ENGINE OM926LA) | |
Model | 382.180/181 with engine 926.988 |
Model | 382.189 with engine 926.996 |
with code MH1 (DIESEL-GASEOUS FUEL ENGINE OM926LA) | |
Model | 979.270/272 with engine 350.900 |
A | Elastic components |
B | Rubber sweeping blades |
B82.30-0009-04
B82.30-0014-01
Combined switch - Version II | ||||
1 | Windshield wiper | |||
0 | OFF | |||
I | Slow speed | |||
II | High speed | |||
2 | Windshield wiper washer: | |||
Combined switch - Version III | ||||
1 | Windshield wiper | |||
0 | OFF | |||
INT | Intermittent operation | |||
I | Slow speed | |||
II | High speed | |||
2 | Windshield wiper washer: | |||
B82.30-0011-01
B82.10-0036-01
Switches on the instrument panel - Example in O 371 | ||||
1 | Windshield wiper switch | |||
2 | Windshield washer switch: | |||
3 | Timer switch | |||
Switches on the instrument panel - Example in O 400 | ||||
1 | Windshield wiper switch (actuation at right side) | |||
B82.10-0038-01
| Check | ||
1 | On wipers, check the elastic components (A) and the rubber sweeping blades (B) | On O 400 vehicles, the wiper actuation, left side, is carried out by the combined switch. On tight side, the actuation is carried out by the dashboard switch. | |
The vehicles with body made by third parties are provisionally supplied with single speed windshield wiper motor, operating only in position (I) of the key type switch (dashboard) or in position (II) of the combined switch, without wiper timer and without windshield washer. The complementation is according to the final body maker's discretion. | |||
If necessary, replace. | |||
2 | Turn ignition key to the ON position. | ||
3 | Check the windshield wiper operation in the intermittent position, low speed (position I), high speed (position II) | ||
4 | Check the operation of the water jets by pressing the combination switch (2) | The water jets should be aimed at the top part of the wiper blade sweep. | |
The actuation of the windshield washer will have to control, simultaneously, the timer operating the windshield wiper. | |||
5 | Operate the switch (1) to the first stage. | Check the wiper's low speed operation. | |
6 | Operate the switch (1) to the second stage. | Check the wiper high speed operation. | |
7 | Turn off the switch (1) and turn on the switch (3). | Check the wiper's timer operation. The timer will have to provide an intermittent cycle of the wipers with intervals from 4 to 6 seconds. | |
8 | Check the operation of the windshield washer pressing the switch (2). | The water jets should be aimed at the top part of the wiper blade sweep. | |
The actuation of the windshield washer will have to control, simultaneously, the timer operating the windshield wiper. |