AP82.25-P-8290M | Check panic alarm system (GAS) | 12.4.05 |
MODEL 220.175 /176 /178 with CODE (Z04) Light armoring
MODEL 220.175 /176 /178 with CODE (Z07) Top protection
| Check | ||
1 | Remove ignition key from ignition switch | Do not store the ignition key in the vehicle during the duration of test otherwise person(s) may be locked out of the passenger compartment | |
2 | Check activate button | Activate buttons are located in the front left and right at the bottom of the dashboard and on the center tunnel in the rear. | |
Press the activate button in sequence respectively. After the respective button operation the central locking must lock completely, the intercom system must switch to reception, the acoustic signaling horn and the hazard warning system with high beam must switch to intermittent, see: | |||
| PAS (GAS) control unit, location/task | ||
In each case press the cancel button immediately after triggering and checking the alarm, see: | |||
| Disarming, function | ||
3 | Check communication system | With a second assistant check the voice function from the outside inwards and from the inside outwards. | |
After checking the communication system insert the microphone again in the bracket in the glove box. Pay attention to the correct installation position. | |||
4 | Operate central locking | Upon completion of the test the vehicle must be unlocked and locked from outside using the DAS [FBS] key. |