P54.10-4820-09
Show on model 253.992 |
1a | Charging cable | 3 | Cap | |
1b | Charging cable | 4 | Sequence | |
2 | Charger feed-in socket | 5 | Lock |
Danger | Risk of explosion caused by escaping hydrogen or overheating of the fuel tanks when working on the hydrogen system. Risk of frostbite to body parts caused by escaping gas and by touching component parts carrying gas when emptying fuel tanks. Risk of asphyxiation caused by inhalation of air diluted by hydrogen. Risk of burn injuries by coming into contact with an invisible pale blue hydrogen flame. | ||
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Topical note | Notes on fuel cell system | ||
Topical note | General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove | ||
1 | Take charging cables (1a) and (1b) out of the vehicle. | ||
| Check | ||
2 | Check charging cable (1a) over the entire length, plugs and switches for cracks, kinks, bites, cuts, crushed areas, chafe marks and other damage. | If problems occur, | |
| |||
replace charging cable (1a). | |||
After obtaining special order. | |||
3 | Check charging cable (1b) over the entire length, plugs and switches for cracks, kinks, bites, cuts, crushed areas, chafe marks and other damage. | If problems occur, | |
| |||
replace charging cable (1b). | |||
After obtaining special order. | |||
| Install | ||
4 | Place charging cables (1a) and (1b) in vehicle. | ||
| Check | ||
5 | Check charger feed socket (2) for damage. | If problems occur, | |
| |||
Replace charger feed socket (2). | |||
After obtaining special order. | |||
6 | Check that cap (3) is firmly seated on charger feed socket (2). | If problems occur, | |
| |||
Replace charger feed socket (2). | |||
After obtaining special order. | |||
7 | Check drain (4) for clear passage and soiling. | | |
If problems occur, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
8 | Check lock (5) by opening and closing cap (3). | If problems occur, | |
| |||
Replace charger feed socket (2). | |||
After obtaining special order. |
Henviste dokumenter
- ah0000p002201rfw Oplysninger om brændselscellesystem
- ah0000z030001a Generelle oplysninger ved køretøjer med højvoltsnet og/eller litium-ion-batteri og/eller gasdrivsystem samt personligt beskyttelsesudstyr
- ah5400p000101a Oplysninger med henblik på at undgå skader på elektroniske komponenter på grund af elektrostatisk afladning
- as0000z003001b Fare for eksplosion som følge af udstrømmende brint eller overophedning af brændstoftanke under arbejde på brintanlægget. Fare for forfrysninger på legemsdele som følge af udstrømmende gas og som følge af berøring af gasførende
- as0000z003501a Livsfare ved arbejde på komponenter og systemer med U >= 30 V vekselspænding (AC) eller U >= 60 V jævnspænding (DC)