ap4910g4982b

Diesel particulate filter - replace filter element in condensation separator

Type ap · emne 49.10 · version 0101 · 2011-08-18

Gælder for: ENGINE 904.927 /928, 906.935 /955

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 49 Udstødningssystem, udstødningsrensning › 49.10 Udstødningsrør, katalysator, lyddæmper — Serie 904 (modeller 927, 928) · Serie 906 (modeller 935, 955)

EinPAS 15 Motor › 15.40 Udstødningssystem/udstødningsefterbehandling › 15.40.50 Udstødningsefterbehandlingsenhed — Serie 904 (modeller 927, 928) · Serie 906 (modeller 935, 955)

AP49.10-G-4982B

Diesel particulate filter - replace filter element in condensation separator

16.8.11

ENGINE 904.927 /928, 906.935 /955

Diesel particulate filter - replace filter element in condensation separator
Diesel particulate filter - replace filter element in condensation separator

G49.10-3148-01

1 Condensate separator

2 Inlet side

3 Outlet side

4 Separating vessel

5 Filter element

6 Nut

G49.10-3149-01

Checking

1

Raise and secure dumper flatbed

See the Operator's Manual .

2

Drain condensation separator (1)

AP49.10-G-4990B

3

Remove condensation separator (1)

Detach the hoses from the inlet side (2) and outlet side (3). Detach the condensation separator (1) from the bracket.

4

Unscrew separator (4)

5

Check filter element (5) for dirt

If cooling system is very dirty:

Replace filter element (5).

Replace

6

Unscrew nut (6) and remove filter element (5)

7

Insert new filter element (5) and tighten nut (6) slightly

8

Screw separator (4) tightly onto condensation separator (1) by hand

Do not use any tools for tightening.

9

Check condensation separator (1) for leaks

Plug the outlet side (3) using your finger and blow into the inlet side (2) with your mouth.

No air should escape.

10

Lower and secure dumper platform

See the Operator's Manual .

Henviste dokumenter