Gælder for: Engine 457.9 in model 382, 634, 685 Engine 457.9 in model 693, 695, 696, 958 Engine 457.9 in model 695 Engine 457.9, 460.984 in model 934.241/251, 938.14 Engine 460.9 in model 963 Engine 541.976 in model 936.315
Gælder også for motorer/gearkasser: 457 9**, 541 976
AP47.00-B-1720-01D
Bleed fuel system
Engine
457.9 in model 382, 634, 685
Engine
457.9 in model 693, 695, 696, 958
Engine
457.9 in model 695
Engine
457.9, 460.984 in model 934.241/251, 938.14
Engine
460.9 in model 963
Engine
541.976 in model 936.315
Engine 457.9, 460.9
B47.00-0003-01
It is not necessary to loosen or disconnect the connections and pipings in order to bleed the fuel system.
Pump the fuel, acting on the hand pump handle (1) until you notice a strong resistance generated by system pressure raise.
Activate engine start, but do not press the accelerator. If engine does not start within 20 seconds, interrupt the start actuation and wait at least one minute before trying again. If the engine does not start, repeat the bleeding operation.
Allow engine to run for about one minute in order to completely eliminate the air from the system through self-bleeding process
