Check brake lining thickness

Type ap · emne 42.10 · version 0102 · 2017-03-30

Gælder for: Model 979.02/07/09 with rear axle 743.454/458, 749.117 with code BB6 (Drum brakes on front and rear axle) Model 979.2 with rear axle 743.454, 772.111 with code BB6 (Drum brakes on front and rear axle)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 42 Bremsehydraulik og -mekanik › 42.10 Driftsbremse — Serie 979 (modeller 02*, 07*, 09*, 2**)

EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.15 driftsbremse/vakuumsystem › 21.15.40 driftsbremse foran — Serie 979 (modeller 02*, 07*, 09*, 2**)

EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.15 driftsbremse/vakuumsystem › 21.15.42 driftsbremse bagest — Serie 979 (modeller 02*, 07*, 09*, 2**)

Gælder også for motorer/gearkasser: 743 454, 743 458, 749 117, 772 111

AP42.10-B-4253LS

Check brake lining thickness

27.03.2017

Model	979.02/07/09 with rear axle 743.454/458, 749.117
	with code BB6 (Drum brakes on front and rear axle)
Model	979.2 with rear axle 743.454, 772.111
	with code BB6 (Drum brakes on front and rear axle)

1	Rubber cover
2	Brake shoe
3	Brake lining
A	Worn threshold

B42.10-0491-10

	Check
1	Remove protective rubber cover (1) from inspection holes	 The rubber cover can be easily removed and manually installed.
2	Check the thickness of the brake linings (3)	 When worn reaches the side shoulder of the lining, that is the indication that the thickness of the worn threshold (A) has been reached.
		 Even if only one of the linings reaches the wear limit, all of them must be replaced.
		If the wear limit is reached
		

		Remove/install brake linings	AR42.10-B-1040LS
3	Reinstall the protective rubber cover (1)

Henviste dokumenter

ar4210b1040ls