Front axle - Set adjustment screw with sliding block

Type ap · emne 33.30 · version 0103 · 2011-04-08

Gælder for: FRONT AXLE 731.700 /720 in MODEL 970.3, 972.3, 976.3

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 33 Foraksel › 33.30 Drev, differentiale, drivaksel — Serie 970 (modeller 3**) · Serie 972 (modeller 3**) · Serie 976 (modeller 3**)

EinPAS 17 Drivstreng/aksel › 17.50 Foraksel › 17.50.30 Foraksel komplet — Serie 970 (modeller 3**) · Serie 972 (modeller 3**) · Serie 976 (modeller 3**)

Gælder også for motorer/gearkasser: 731 700, 731 720

AP33.30-W-3360A

Front axle - Set adjustment screw with sliding block

5.4.11

FRONT AXLE 731.700 /720 in MODEL 970.3, 972.3, 976.3

N35.00-0280-01

N35.00-0279-01

Front axle (example)

1 Adjustment screw

2 Jam nut

3 Sliding block

1	Slacken lock nut (2)	 Counterhold the adjustment screw (1).
2	Screw in adjustment screw (1) until sliding block (3) touches edge of ring gear	 Counterhold the jam nut (2).
3	Unscrew adjusting screw (1) by 45°.	 Adjust gap between edge of ring gear and sliding block (3)
4	Tighten lock nut (2).	 Counterhold the adjustment screw (1) when doing so.
			*BA33.10-N-1003-02B

 Front axle