AP33.10-W-3321A | Joint housing of all-wheel drive front axle - inspect grease packing and correct | 5.4.11 |
FRONT AXLE 731.700 /720 in MODEL 970.3, 972.3, 976.3
N33.10-2004-01
| Checking | ||
1 | Check track rod ends | The track rod ends must always have a light coating of grease. If the track rod ends are dry or corroded determine the reason why and rectify - subject to separate repair order. | |
2 | Undo screw plug (1) from joint housing at left and right | When testing the left joint housing turn the steering to the right and when testing the right joint housing turn the steering to the left. | |
3 | Check grease fillings, correct if necessary | The joint housings must be filled with grease up to the lower edge of the opening on the screw plug (1), if this is not the case: | |
Insert flexible grease gun extension into the openings and fill joint housings with grease. Do not fill joint housings beyond the lower edge of the openings on the screw plug (1). | |||
| Multipurpose grease (NLGI Class 2) | Sheet 267.0 | |
4 | Turn screw plug (1) into the joint housings at left and right | |
Wheel location, hub