Clutch actuation - replace brake fluid

AP25.20-B-2981TC

Clutch actuation - replace brake fluid

18.03.2020

Model

958 with engine 904.966/967/972, 906.985, 924.989, 926.941/991/994

1

Bleeding device connection

2

Protection cover

3

Transparent hose for draining

4

Bleeding valve

 Caution

Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid

Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.

AS42.50-Z-0001-01A

Brake fluid notes

AH42.50-B-0001-01A

1

Remove tank cover and suck out the old brake fluid

 The tank return port should be covered with brake fluid.

Use manual pump to suck out the brake fluid.



 Hand pump

*210589007100

2

Install the bleeding device connecting piece (1) and activate it

 Observe operating instructions for the drain device manufacturer (1).

3

Remove protection cover (2) and connect the transparent drain hose (3) to the drain valve (4)

 The transparent drain hose (3) must connect the drain valve (4) to a appropriate recipient.

4

Open the drain valve (4) and let the new brake fluid come out until there are no more bubbles visible in the transparent drain hose (3)

5

Close the drain valve (4), remove the transparent drain hose (3) and install protective cap (2)

6

Turn off bleeding device and disconnect the connecting piece (1)

 Observe the service instructions for the drain device manufacturer (1).

7

Correct the brake fluid level

8

Install the reservoir cap

9

Check bleed valve (4) for leaks