Engine cooling system capacity |
Number | Designation | Engine Motor 350.905 | |||
BF20.00-B-1001-01N | Cooling system - Approximate level | Do not mix products between classes | Based on respective application | litros | 38 a 57 |
Anti-corrosive/anti-freeze CLASSES MB 325.0, MB 325.3, MB 325.5 | % | 50 | |||
Anti-corrosion CLASS MB 312.0 | % | 10 | |||
Product already diluted | Anti-corrosion/anti-freeze CLASS MB 326.0, MB 326.3, MB 326.5 | litros | 38 a 57 |
1 | Remove the filling nozzle cap (1) from the reservoir (2) |
2 | Remove the water radiator drain plug and drain the coolant in a proper container. |
When draining the cooling, proceed with it ecologically. |
3 | Install the drain plug on the cooler. |
4 | Prepare the coolant in a separate container, by means of agitation to perfectly homogenize the mix. |
5 | Control the concentration of the mix utilizing a hydrometer. |
If necessary make corrections, adding water or additive until you obtain the prescribed concentration. |
6 | Fill the cooling system up to the bottom edge of the filling nozzle (1). |
Check it daily, avoiding the coolant to lie below the level (A), fill it, if necessary. |
Disconsider the maximum and minimum level marks, if existent. |
7 | Install the filling nozzle cap (1) in the reservoir (2). |
1 | Fueling nozzle |
2 | Reservoir |
A | Refueling maximum level(correct) |
B20.00-0072-11