ap1820i010004b

Replace oil filter element

Type ap · emne 18.20 · version 0106 · 2007-04-03

Gælder for: ENGINE 904.941 in MODEL 684.482

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 18 Motorsmøring, motoroliekøling › 18.20 Oliefilter — Serie 684 (modeller 482) · Serie 904 (modeller 941)

EinPAS 15 Motor › 15.20 Motorsmøresystem › 15.20.31 filter/køling/termostat/ventilator/beholder — Serie 684 (modeller 482) · Serie 904 (modeller 941)

AP18.20-I-0100-04B

Replace oil filter element

Oil filter

Number

Designation

Engines
900.9, 902.9, 904.9, 906.9

BA18.20-N-1003-01B

Oil filter cover to oil filter housing

Nm

25

Replace oil filter element

Socket wrench insert WAF 94 mm (14-point)

366 589 01 07 00

Replace oil filter element

N18.20-0252-01

1 Unscrew the oil filter cover (1) of the oil filter using the socket wrench insert and pull out of the oil filter housing together with the oil filter element (3) attached.

Allow the engine oil to flow out of the oil filter housing. Ensure that no foreign matter gets into the oil filter housing. Never wipe out the oil filter housing.

2 Unclip oil filter element (3) on oil filter cover (1).

3 Replace sealing ring (2).

Grease the new seal ring (2) lightly before installation.

4 Insert new oil filter element (3) into the oil filter cover (1).

5 Insert the oil filter cover (1) with the new oil filter element (3) into the oil filter housing and tighten, .