ap1540p1530a

Clean alternator

Type ap · emne 15.40 · version 0200 · 2010-08-10

Gælder for: ENGINE 612 in MODEL 461.302 /331 /332 /342 /345 ENGINE 642 in MODEL 461.304 /305 /333 /334 /340 /343 /344 /346

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 15 El-system motor › 15.40 Generator — Serie 461 (modeller 302, 304, 305, 331, 332, 333, 334, 340, 342, 343, 344, 345, 346)

EinPAS 25 bilens ledningsnet/netværk/multifunktion › 25.20 Køretøjets ledningsnet › 25.20.30 Generator — Serie 461 (modeller 302, 304, 305, 331, 332, 333, 334, 340, 342, 343, 344, 345, 346)

Gælder også for motorer/gearkasser: 612 ***, 642 ***

AP15.40-P-1530A

Clean alternator

5.8.10

ENGINE 612 in MODEL 461.302 /331 /332 /342 /345

ENGINE 642 in MODEL 461.304 /305 /333 /334 /340 /343 /344 /346

Clean alternator

P15.40-2472-11

G2 Generator

G2/1 Alternator 24V

Modification notes

20.5.10

Rinse alternator with water spray, added

Operation step 4

Remove/install

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

Danger!

Risk of injury to skin and eyes caused by handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

1

Raise vehicle

AR00.60-P-1000G

2

Remove underride guard

3

Start engine

Clean

4

Rinse alternator (G2) and alternator 24V (G2/1) with water spray

Only use clean fresh water and do not add cleaning agents or solvents. If necessary fabricate suitable angled nozzle.

5

Allow alternator (G2) and alternator 24V (G2/1) to dry

To do this, allow engine to continue running for approx 5 minutes.

6

Install in the reverse order

Henviste dokumenter