ap0900b0953evi

Inspect intake line between air filter and engine for leaks and proper condition

Type ap · emne 09.00 · version 0100 · 2018-04-18

Gælder for: Engine 936.9 in model 382.155/189 with code MS6 (Euro VI)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 09 Luftindsugning, luftladning › 09.00 Generelt — Serie 382 (modeller 155, 189) · Serie 936 (modeller 9**)

EinPAS 15 Motor › 15.30 Luftindsugning/opladning › 15.30.32 ledning/slange/ventil — Serie 382 (modeller 155, 189) · Serie 936 (modeller 9**)

AP09.00-B-0953EVI

Inspect intake line between air filter and engine for leaks and proper condition

12.04.2018

Engine

936.9 in model 382.155/189

with code MS6 (Euro VI)

Inspect intake line between air filter and engine for leaks and proper condition

B09.00-0022-09

1

Air filter housing

2,4

Air intake piping

3

Turbocharger

Check

1

Open the engine compartment

The access for carrying out the maintenance and repair works varies according to type of body manufacturer.

Refer to the body makers instructions.

2

Check the air intake pipes (2,4)

Check the air intake pipes (2,4) and the air cleaner housing (1) from the exhaust turbocharger (3) and from the aftercooler assembly to the engine concerning to the not damaged state, the correct seating and fixation of the clamps, as well as for leak-tightness on the junction points

In this case, pay attention on leaks, damages and other states (e.g. porosity, friction points), which eliminate any reutilization of the component.

If damages or faults are noticed:

Eliminate damages/failures – with separate invoicing.

3

Close the engine compartment